XLW (M) Auto Tensile Tester

Technical Specifications

Specifications	XLW (M)
Load Cell Capacity	100 N, 200 N, 500 N (one of them is available)
Accuracy	1% FS
Test Speed	50, 100, 150, 200, 250, 300, 500 mm/min
Number of Specimens	1
Specimen Width	30 mm (Standard Grip) 50 mm (Optional Grip)
Clamping Way	Pneumatic Specimen Clamp
Stroke	600 mm
Pressure of Gas Supply	0.5 MPa~0.7 MPa (outside of supply scope)
Port Size	Φ4 mm PU Tubing
Instrument Dimension	450 mm (L) x 580 mm (W) x 1100 mm (H)
Power Supply	AC 220V 50Hz
Net Weight	60 kg

Principle

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation.

Standards

This instrument conforms to various national and international standards as follows:
ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358, QB/T 1130, GB 8808, GB/T1040.1-2006, GB/T1040.2-2006, GB/T 1040.3-2006, GB/T1040.4-2006, GB/T1040.5-2008, GB/T4850-2002, GB/T12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590

This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special materials tests. Examples of instrument applications:

Basic Applications	Shearing Test
	Test of Tensile Strength and Elongation Rate
	Test of Tensile Strength at Break
	Tear Resistance Test
	Heat Seal Strength Test
	90 Degree Peel Test
	180 Degree Peel Test

Extended Applications (Additional Accessories Required)	Puncture Test of Hypodermic Needles in Artificial Skin	Puncture Test of Films
	Puncture Test of Infusion Bags	Puncture/Pullout Test of Flexible Rubber Closures
	Opening Resistance Test of Combined Covers	Tear Test of ZD - Type Caps
	Opening Force Test of Oral Liquid Caps	Puncture/Pullout Test of Oral Liquid Caps
	90 Degree Pullout Test of Infusion Bag Caps	Pullout Test of Infusion Bag Caps
	23 Degree Pullout Test of Bottle Caps	Puncture/Pullout Test of Bottle Caps or Rubber Closures
	90 Degree Peel Test of Adhesive Tapes	Tear Resistance Test of Adhesive Binding Books
	90 Degree Peel Test of Water-soluble Plasters	Tear Resistance Test of Adhesives
	Adhesive Strength Test (soft)	Adhesive Strength Test (hard)
	Peel Test of Flexible Tube Caps	Removal Force of Pipes and Pipe Joints
	Pullout Test of Cosmetic Brush Hair	Pullout Test of Tooth Brush Hair
	Tensile Strength of Ropes at Break	Opening Force Test of Jelly Cups and Yogurt Cups
	Peel Test of Cup Films	Pullout Test of Rubber Stoppers
	45 Degree Peel Test of Bottle Membranes	Tensile Strength of Sealing Bags
	Peel Test of Magnetic Cores	90 Degree Peel Test of Magnetic Cards
	Tear Resistance of Heat Sealing Films	Separating Force of Protection Films
	Peel Test of Release Paper	Tear Test Using Trouser Method
	Unwrapping Force of Adhesive Tapes	Compressive Resistance of Plastic Bottles
	20 Degree Peel Test	135 Degree Peel Test of Plugs
	Peeling Grips of Floating Rollers	Eccentric Grips
	Japanese Sample Grips	British Sample Grips
	Tensile Strength of Contact Lenses at Break

1% of full scale effectively ensures accurate test results

7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages

Specimen is mounted tightly with pneumatic specimen clamp to ensure the accuracy of test results

Different ranges of load cells and 7 distinct test speeds to meet different test requirements

The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display

Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation

Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection

Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter setting, printing, inquiry, clear and calibration, etc.

Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Standard Configurations

Mainframe, Pneumatic Clamping System, Professional Software and Communication Cable

Optional Parts

Micro Printer, Printing Cable, Standard Pressure Roller, Test Plate, Sample Cutter and Customized Grips

Note

1. The gas supply port of this instrument is Φ4 mm PU Tubing;
2. Customers will need to prepare for gas supply.