MED-01 Medical Packaging Tester

Technical Specifications

Specifications	MED-01
Load Cell Capacity	250 N (standard)
	50 N, 100 N, 500 N (optional)
Accuracy	Better than 0.5% FS
Test Speed	Forward:10, 50, 100, 150, 200 mm/min (standard)
	Backward:10, 50, 100, 150, 200 mm/min (standard)
Number of Specimens	1
Specimen Width	30 mm (Standard Grip)
	50 mm (Optional Grip)
Clamping Way	Manual Specimen Clamp
Stroke	600 mm
Instrument Dimension	365 mm (L) x 585 mm (W) x 960 mm (H)
Power Supply	AC 220V 50Hz
Net Weight	68 kg

Principle

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven up  and embedded displacement transducer. The relative parameters of force properties can be obtained by further calculation.

Standards

This test instrument conforms to the following standards:
ISO 37, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB14232.1-2004, GB15811-2001, GB/T1962.1-2001, GB2637-1995, GB15810-2001, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, QB/T 2358, QB/T 1130, JIS P8113, YY0613-2007, YBB00042002, YBB00112004

This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications:

Basic Applications	Tensile Test	Puncture Test of Rubber Closures
	Test of Tensile Strength and Elongation Rate	Break Test of Ampoule Bottles
	Test of Tensile Strength at Break	Sliding Resistance Test of Hypodermic Syringe
	Tear Resistance Test	Seal Performance Test of Hypodermic Syringe
	Heatseal Strength Test	Puncture Test of Hypodermic Needle
	90 Degree Peel Test	Fastness Performance Test of Hypodermic Needle and Needle Hub
	180 Degree Peel Test	Fastness Performance Test of Hypodermic Needle Cap and Needle Hub
	Compression Test of Plastic Blood Bags

Extended Applications (Additional Accessories Required)	Seal Performance Test of Hemostix	Pullout Force Test of Rubber Closures
	Opening Force Test of Jelly Cups and Yogurt Cups	Unwinding Force Test of Adhesive Tapes
	Tear Test Using Trouser Method	Peel Test of Protection Films
	Peel Test of Release Paper	Opening Resistance Test of Combined Covers
	90 Degree Peel Test of Adhesive Tapes	Puncture Test of Plastic Films
	Tensile Stress Test of Ropes at Break	90 Degree Peel Test of Magnetic Cards
	Pullout Test of Cosmetic Brush Hair	Pullout Test of Toothbrush Hair
	23 Degree Pullout Test of Bottle Caps	Opening Force Test of Oral Liquid Caps
	Tear Resistance Test of Adhesive Binding Books	Peel Test Using Floating Rollers
	Compression and Deformation Test of Foams

Professional

MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges. The instrument is designed with 16 independent test modes and bidirectional test mode of stretching and compression, which can meet various test requirements.

Better than 0.5% of full scale effectively ensures accurate test results

16 independent test modes are available, including compression force, tensile strength, and peel strength of medical appliances and foams

Professional pressure sensor monitors the internal pressure change during the test of force properties

The system supports bidirectional test mode of stretching and compression, and 5 test speed can be freely selected based on user requirements

Intelligent designs of over-travel protection, overload protection, and automatic position reset for safe test operation

Intelligent

This instrument utilizes Labthink's latest embedded computer control system and operating software, with user-friendly operating interface and intelligent data management. It also supports Lystem^TM Lab Data Sharing System, which ensures uniform management of test results and test reports.

Embedded computer control system provides safer and more reliable data management as well as test operation

The system can be easily operated by a standard monitor, a mouse and a keyboard; without requiring a PC

The system is equipped with four USB ports and dual Internet ports for convenient input, output and data transfer

Status monitoring and intelligent reminding of sensor calibration ensure instrument in the best working condition

Historical data back up and management functions for diversified data analysis

The system uses the high performance processor core and large storage space, which can conduct data comparison and analysis for 50 parallel tests at the same time 

Multi-level account control for better data management and protection

Embedded help document for user viewing at any time

Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Standard Configurations

Mainframe, Professional Software, Standard Monitor, Mouse, Keyboard and Universal Grips

Optional Parts

Load Cell, Standard Pressure Roller, Test Plate, Sample Cutter, Floating Roller, Customized Grips, Lystem Lab Data Sharing System, Printer(compatible with PCL3) and Other Test Accessories, e.g. Penetration Test of Rubber Stoppers in Antibiotic Bottles and Hypodermic Needles, Fracture Strength Test of Ampoule Bottles, Leak Test of Plastic Packages under External Pressure, Connection Force Test between Hypodermic Needle and Needle Hub, Connection Force Test between Hypodermic Needle and Needle Cap, Sliding Resistance Test of Pistons, Leak Test of Plastic Packages and Low Speed Unwrapping Device